RuggedCom RX1100 ユーザーズマニュアル
RuggedRouter
User Guide
Modem PPP Client Connections
Figure 83: Configure Modem PPP Client
To edit an existing connection, click the 'Edit' link for that connection.
To create a new connection click 'Add new' link.
To have the router automatically dial a connection at boot and keep it up all the time,
select which connection should be used from the drop down list of available
connection profiles in the 'Connect at boot' list.
To create a new connection click 'Add new' link.
To have the router automatically dial a connection at boot and keep it up all the time,
select which connection should be used from the drop down list of available
connection profiles in the 'Connect at boot' list.
Modem PPP Client
Figure 84: Configure Modem PPP Client
The Connection Name field determines what name will be used to refer to this
connection when choosing which connection to dial automatically at boot, or which
connection to use as a backup for another link.
The PPP Username field determines the user name to use when connecting to the
PPP server as specified by your provider.
The Password field determines the password to use when connecting to the PPP
server.
The Dial type field determines the type of dialing system to use on the phone line.
Either DTMP (Tone dialing) or Pulse. Almost all phone systems support DTMF, and
DTMF is much faster at dialing. DTMF is recommended whenever possible.
The Phonenumber field specifies the number to dial to connect to the PPP server.
The Default Route checkbox enables automatically setting a default route using this
interface whenever it connects. If this is your primary connection you probably want
this option enabled.
The Use peer DNS checkbox enables automatically setting the DNS server entries
that the PPPoE server recommends. Enable this option unless you provide your own
name servers.
connection when choosing which connection to dial automatically at boot, or which
connection to use as a backup for another link.
The PPP Username field determines the user name to use when connecting to the
PPP server as specified by your provider.
The Password field determines the password to use when connecting to the PPP
server.
The Dial type field determines the type of dialing system to use on the phone line.
Either DTMP (Tone dialing) or Pulse. Almost all phone systems support DTMF, and
DTMF is much faster at dialing. DTMF is recommended whenever possible.
The Phonenumber field specifies the number to dial to connect to the PPP server.
The Default Route checkbox enables automatically setting a default route using this
interface whenever it connects. If this is your primary connection you probably want
this option enabled.
The Use peer DNS checkbox enables automatically setting the DNS server entries
that the PPPoE server recommends. Enable this option unless you provide your own
name servers.
98 RuggedCom