RuggedCom RX1100 ユーザーズマニュアル
RuggedRouter
User Guide
The Transmit Delay field controls the estimated number of seconds to transmit a link
state update packet. This should take into account transmission and propagation
delays of the interface.
The Passive Interface option controls if an interface is active or passive. Passive
interfaces do not send LSAs to other routers and are not part of an OSPF area.
The Authentication field controls the type of authentication to use when
communicating with other routers. It can be none, null (just check for message
corruption) or message digest, which cryptographically signs each message with a
shared key.
The Message Digest Keys fields allows for addition and deletion of keys to use for
areas connected to this interface when authentication is set to message-digest.
state update packet. This should take into account transmission and propagation
delays of the interface.
The Passive Interface option controls if an interface is active or passive. Passive
interfaces do not send LSAs to other routers and are not part of an OSPF area.
The Authentication field controls the type of authentication to use when
communicating with other routers. It can be none, null (just check for message
corruption) or message digest, which cryptographically signs each message with a
shared key.
The Message Digest Keys fields allows for addition and deletion of keys to use for
areas connected to this interface when authentication is set to message-digest.
OSPF Network Areas
Figure 124: Network Areas
OSPF uses areas to control which routes are distributed between routers. To add a
network to an area, enter the area id and the network address and netmask and click
Add. To delete an entry click the Delete button beside the entry. All networks routes
that are part of the same area will be distributed to other routers in the same area.
network to an area, enter the area id and the network address and netmask and click
Add. To delete an entry click the Delete button beside the entry. All networks routes
that are part of the same area will be distributed to other routers in the same area.
OSPF Status
This status menu shows various pieces of information about the current OSPF status.
The status of each interface is shown, the current database, the current OSPF
neighbors and the current OSPF routing table.
The status of each interface is shown, the current database, the current OSPF
neighbors and the current OSPF routing table.
View OSPF Configuration
This menu shows the current configuration file of OSPF.
RIP
Figure 125: RIP Menu
This menu contains the configuration and status of RIP on the router.
150 RuggedCom