Radio Shack FC-241 ユーザーズマニュアル

This chapter describes how to configure a router as a server, change MOP parameters, configure the 
router to forward extended BOOTP requests over asynchronous interfaces, and configure rcp, rsh, and 
FTP. 

For a complete description of the file transfer function commands mentioned in this chapter, refer to the 
“Additional File Transfer Functions Commands” chapter in the Configuration Fundamentals Command 
Reference. To locate documentation of other commands that appear in this chapter, use the command 
reference master index or search online.

To configure additional file transfer functions, perform any of the tasks in the following sections:

It is too costly and inefficient to have a machine which only acts as server on every network segment. 
However, when you do not have a server on every segment, your network operations can incur enormous 
time delays across network segments. You can configure a router to serve as a RARP or TFTP server to 
reduce costs and time delays in your network while allowing you to use your router for its regular 
functions.

Typically, a router that is configured as a server provides other routers with operating system images 
from its Flash memory. You can also configure the router to respond to other types of service requests, 
such as Reverse Address Resolution Protocol (RARP) requests.

To configure the router as a server, perform any of the tasks in the following sections. The tasks are not 
mutually exclusive.