TP-LINK TL-MR7HN プリント

www.tp-link.com

Set your wireless parameters. If desired, you may change your 
Wireless Network Name, Wireless Security Mode, or Password.
Click 

” and then “

”.

Choose your WAN Connection Type:

If you select 

, click “

” and continue to step 2.

If you select 

, then enter the IP Address and Subnet 

Mask given to you by your ISP, and click “

”.

If you select 

, then enter the User Name and Password 

given to you by your ISP,  and click “

”.

If you don't know your connection type, you may select 
“

”. Before continuing, you must be connected to 

your existing network or modem via the 

.

Choose your WAN Connection Type:

Click “

” button to find the available wireless networks. 

Then select the SSID of your target network and click “

”.

The target network’s SSID and BSSID will automatically fill the 
relevent wireless setting boxes. Select the 

 and enter the 

. Click “

” and then “

”.

The USB port on the TL-WR710N can be used to share files, media, 
and local storage space across your network. 

Scan the QR code to access the Application 

Guide for USB features on

Local Storage Sharing

Media Sharing

 and Media Server 

You can also use the USB port to charge your phone or tablet!
 For more detailed information about USB features, you may 
refer to the User Guide on the Resource CD.

http://tplinklogin.net

admin

The login username and password are 

.

The quick setup will tell you how to configure the basic network parameters.

 

      To continue, please click the Next button.

 

      To exit, please click the Exit button.

Next

Exit

Next

Back

Start >> Working Mode >> Wireless >> Finish

Set your wireless parameters. If desired, you may change your 
Wireless Network Name, Wireless Security Mode, or Password.
Click 

” and then “

”.

After the rebooting, reconnect to the network according to 
“

.

If you select 

, click “

” and continue to step 2

.

If you select 

, then enter the IP Address and Subnet 

Mask given to you by your ISP, and click “

”.

If you select 

, then enter the User Name and Password 

given to you by your ISP,  and click “

”.

The target network‘s SSID will be automatically filled into the 
wireless setting page. Select the Security Mode and enter the 
Password. Then click “

“. 

The examples illustrated below are from Repeater Mode, but the procedure is similar for Client Mode.

After the rebooting, reconnect to the network according to 
“

.

After the rebooting, reconnect to the network according to 
“

.

After the rebooting, reconnect to the network according to 
“

.

Mask given to you by your ISP, and click 

.

 - Let the Router automatically detect the connection type your ISP provides.

- Usually for Cable Modem and the router will automatically obtain an IP address from the DHCP server.

- This type of connection uses a permenant, fixed (static) IP address that your ISP assigned.

- Usually for ADSL Modem and you will need a PPPoE username and password from your ISP.

The Quick Setup is preparing to set up your connection type of WAN port.

 

The Router will try to detect the internet connection type your ISP provides if you select the Auto-Detect option.
Otherwise, you will need to specify the connection type manually.

WAN Connection Type >> Wireless >> Finish

Next

Back

- Usually for Cable Modem and the router will automatically obtain an IP address from the DHCP server.

- This type of connection uses a permenant, fixed (static) IP address that your ISP assigned.

- Usually for ADSL Modem and you will need a PPPoE username and password from your ISP.

The Quick Setup is preparing to set up your connection type of WAN port.

WAN Connection Type >> Wireless >> Finish

Next

Back

Click 

 and then 

.

f

h

b

h

k

d

(Also called the SSID)

Ensure you select a correct country to conform local law.
Incorrect settings may cause interference.

United States

11bgn mixed

Auto

Start >> Working Mode >> WAN Connection Type >> Wireless >> Finish

WPA-PSK/WPA2-PSK

(You can enter ASCII characters between 8 and 63 or Hexadecimal characters betwee

Next

Back

Auto

Disable

Disable Security

No Change

After the rebooting reconnect to the network according to

(Also called the SSID)

Ensure you select a correct country to conform local law.
Incorrect settings may cause interference.

United States

11bgn mixed

Auto

Auto

Start >> Working Mode >> Wireless >> Finish

Most Secure (WPA/WPA2-PSK)

(You can enter ASCII or Hexdecimal characters. For hexdecimal, the length should
be between 8 and 64 characters; for ASCII, the length should be between 8 and 63
characters. For good security it should be of ample length and should not be a
commonly known phrase.

Next

Back

1

WPA-PSK/WPA2-PSK

Start >> Working Mode >> WAN Connection Type >> Wireless >> Finish

Most Secure (WPA/WPA2-PSK)

(You can enter ASCII or Hexdecimal characters. For hexdecimal, the length should
be between 8 and 64 characters; for ASCII, the length should be between 8 and 63
characters. For good security it should be of ample length and should not be a
commonly known phrase.

Next

Back

open

Survey

Example: 00-1D-0F-11-22-33

. Click 

 and then 

.

Afte

r th

e re

booting,

reconne

ct to th

e ne

twork ac

cordin

TP-LINK_Network

1

WPA-PSK/WPA2-PSK

Start >> Working Mode >> WAN Connection Type >> Wireless >> Finish

Most Secure (WPA/WPA2-PSK)

(You can enter ASCII or Hexdecimal characters. For hexdecimal, the length should
be between 8 and 64 characters; for ASCII, the length should be between 8 and 63
characters. For good security it should be of ample length and should not be a
commonly known phrase.

Next

Back

open

Survey

Example: 00-1D-0F-11-22-33

1234567890

94-0C-6D-2F-3C-BE

TP-LINK_2046F2

1234567890

Start >> Working Mode >> Wireless >> Finish

No Security

All security settings, for example the wireless password should match the Root AP.

 

If you choose No Security mode, the wireless stations will be able to connect
the AP without encryption. It is recommended strongly that you choose one of
following options to enable security.

Next

Back

(Also called the SSID)

Ensure you select a correct country to conform local law.
Incorrect settings may cause interference.

United States

You can click the Survey Button to scan the network SSIDs,
and then choose the target one to setup the connection.

Survey

Universal Repeater

WDS Repeater

Password. Then click 

.

Start >> Working Mode >> Wireless >> Finish

Most Secure (WPA-PSK/WPA2-PSK)

All security settings, for example the wireless password should match the Root AP.

If you choose No Security mode, the wireless stations will be able to connect
the AP without encryption. It is recommended strongly that you choose one of
following options to enable security.

Next

Back

(Also called the SSID)

Ensure you select a correct country to conform local law.
Incorrect settings may cause interference.

United States

You can click the Survey Button to scan the network SSIDs,
and then choose the target one to setup the connection.

Survey

Universal Repeater

WDS Repeater

1234567890

TP-LINK_Network

94-0C-6D-2F-3C-BE

With the Router powered on, use a pin to press and hold the 
Reset button for about 5 seconds.

Restore the TL-WR710N to its factory default settings (see 
below).

Try to configure your Router once again by following the 
instructions in the previous steps of the QIG.

To log in the Web Management page, use the default user 
name and password: admin, admin.

To connect to the Wireless Network, use the default 
password on the label.

Upon reset, the device will clear all previous configurations
and 

Wireless Network Name (SSID)

Web Management Page Password

Web Management Page User Name

Wireless Password

Please use the space below to write down your

custom Wireless Network Name (SSID) and password,

and Web Management Page User Name and Password.

For more troubleshooting support, please visit:

or contact our Unlimited 24/7 Technical Support

Toll Free: +1 866 225 8139
Email: support.usa@tp-link.com

Plug your TL-WR710N into a power outlet and use its 

to connect your computer via Ethernet cable. 

, and 

.

Open a web browser and go to the page 

. 

Enter the login username: 

and password: 

.

After a successful login, click “

” from the menu to 

configure your TL-WR710N.  Click “

”.

Choose the Working Mode you need, then click “

” and refer to 

the sections below for further instruction.

Click “

” button to find the available wireless networks. 

Then select the SSID of your target network and click 
“

”.

When choosing an ideal location to optimize the performance of 
repeater mode, please keep the points below in mind.

Generally, the ideal location for your TL-WR710N is half-way 
between your wireless router and your Wi-Fi enabled devices. 
If that is not possible, placing the TL-WR710N closer to your 
wireless router will ensure stable performance.

Try to choose a location that will minimize the number of 
obstacles between the TL-WR710N and your wireless router. 
Open corridors or other spacious locations will typically 
provide better conditions for performance than a crowded
room.

Try to choose a location that minimizes interference from 
devices operating on the same wireless frequency, such as 
cordless phones bluetooth devices, and microwave ovens.

Reset the cable modem by powering it off, and then powering 
it back on. Wait until its ONLINE LED is solid. Next, unplug the 
TL-WR710N and plug it back in. This will allow you to access 
Internet in most cases.

If the above does not work and you are unsure which mode 
the TL-WR710N is in, please reset the TL-WR710N so that it 
defaults back to Router Mode.

Low signal strength can be caused by obstruction from walls or 
objects. If you are receiving low signal strength, try to place your 
TL-WR710N in a higher location, keeping it away from 
obstructed locations like under or behind a desk.

Generally speaking, putting your TL-WR710N in a location 
central to your home will maximize your signal coverage.

In any time if you want to change the Operating Mode, please refer 
to the "

" Section to change the 

mode. You may also change any settings via the Web management 
page.

You need change your computer’s configuration settings to “obtain 
an IP address automatically” and “obtain DNS server address 
automatically.”

 

Please refer to the instructions below:

Go to  Start -> Control Panel -> View network status and 
tasks -> Change adapter settings.
Right click  “Wireless Network  Connection”or "Local Area 
Connection", and select “Properties”.
Double click  “Internet Protocol Version 4 (TCP/IPv4)”  in the 
list.
Set the TCP/IP Protocol to "Obtain an IP address 
automatically", then click OK.

Go to  Metro Interface -> Control Panel -> View network 
status and tasks -> Change adapter settings.
Right click  “Wireless Network  Connection”or "Local Area 
Connection", and select “Properties”.
Double click  “Internet Protocol Version 4 (TCP/IPv4)”  in the 
list.
Set the TCP/IP Protocol to "Obtain an IP address 
automatically", then click OK.

Click the Apple icon on the upper left corner of your screen. 
Go to System Preferences -> Network.
Select “Airport” from the left menu bar and then click 
“Advanced” for wireless configuration, or “Ethernet” for wired 
configuration.
Set “Configure IPv4” to “Using DHCP”, then click “Apply”.

By default, your wireless channel setting is set to “auto”

. This 

setting causes the TL-WR710N to select the least congested 
channel between 1 and 11, allowing you to achieve the best 
performance.

You may be experiencing frequent wireless drops due to an often 
changing channel setting. In this case, setting your wireless 
channel setting to a static channel between 1 and 11 will prevent 
the wireless frequency from changing, and likely stabilize your 
network connection.