TP-LINK RE210 ユーザーズマニュアル
RE210
AC750 Wi-Fi Range Extender User Guide
29
Appendix B: Troubleshooting
T1. How do I restore my Range Extender
’s configuration to its factory default settings?
There are TWO methods available to restore the factory defaults.
Method 1:
With the Range Extender powered on, press and hold the Reset button (about 6 seconds)
until all the LEDs turn on momentarily, then release the button and wait the Range Extender
to reboot to its factory default settings.
until all the LEDs turn on momentarily, then release the button and wait the Range Extender
to reboot to its factory default settings.
Method 2:
Get logged in to the web-based management page of RE210, t
hen go to “System Tools ->
Factory Defaults
” and click “Restore”.
Note:
Once the Range Extender is reset, the current configuration settings will be lost and you will
need to reconfigure it.
need to reconfigure it.
T2. What can I do if I forget my password?
1) Restore the Range Extender
’s configuration to its factory default settings. If you don’t
know how to do that, please refer to previous T1;
2) Use the default user name and password: admin, admin;
3) Try to reconfigure your Range Extender by following the instructions of this UG.
T3. What can I do if I cannot access the web-based configuration page?
1) Check to verify all the connections (either wireless or wired ones) are proper. If yes,
please proceed to the next step; otherwise, check the connections again.