TP-LINK WiFi Pocket Router/AP/TV Adapter/repeater ユーザーズマニュアル

 

- 7 - 

1.  Connect the LAN or LAN/WAN port of TL-WR710N to the wired network port with an Ethernet 

cable. 

2.  Plug the power plug of TL-WR710N in electrical wall socket. 

3.  Power on the PC(s) and notebook(s). 

Repeat signal from an existing wireless network. This mode is suitable to extend wireless 

coverage, reaching devices that were previously too far from your primary router to maintain a 

stable wireless connection. The repeated signal will display the same network name and 

password as your existing wireless network. 

Figure 2-3 Hardware Installation of the TL-WR710N in Repeater Mode 

1.  Plug the power plug of TL-WR710N in electrical wall socket. 

2.  Power on the notebook(s). 

)

It is recommended that you connect a PC/notebook to the LAN port of the Router with an Ethernet 

cable, and then login the Router from the PC/notebook to set the Router in Repeater mode. 

 

In this mode, this device can be connected to another device via Ethernet cable and act as an 

adapter to grant your wired devices access to a wireless network, especially for a Smart TV, 

Media Player, or Game console only with an Ethernet port.