TP-LINK WiFi Pocket Router/AP/TV Adapter/repeater ユーザーズマニュアル

 

- 213 - 

4. Click 

the Add New... button.  

1)  Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-00-07-5F in the MAC Address field. 

2)  Enter wireless station A/B in the Description field. 

3) Select Enabled in the Status pull-down list. 

4) Click the Save button. 

5) Click the Back button. 

The filtering rules that configured should be similar to the following list: 

 

Figure 8-20 Filtering Rules 

Choose menu “Wireless  → Wireless Advanced”, and then you can configure the advanced 

settings of your wireless network. 

 

Figure 8-21 Wireless Advanced 

¾

 

Transmit Power - Here you can specify the transmit power of Router. You can select High, 

Middle or Low which you would like. High is the default setting and is recommended. 

¾

 

Beacon Interval - Enter a value between 20-1000 milliseconds for Beacon Interval here. 

The beacons are the packets sent by the Router to synchronize a wireless network. Beacon 

Interval value determines the time interval of the beacons. The default value is 100.   

¾

 

RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the packet 

is larger than the specified RTS Threshold size, the Router will send RTS frames to a