TP-LINK WiFi Pocket Router/AP/TV Adapter/repeater ユーザーズマニュアル

 

- 228 - 

5. Select 

Enable in Status field.   

6. Click 

the 

Save button to save the new rule. 

 

Figure 8-41    Add or Modify a Port Triggering Entry 

1. Click 

the 

Modify  in the entry you want to modify. If you want to delete the entry, click the 

Delete. 

2.  Modify the information.   

3. Click 

the 

Save button. 

Click the Enable All button to make all entries enabled. 

Click the Disable All button to make all entries disabled. 

Click the Delete All button to delete all entries. 

)

 

1.  When the trigger connection is released, the corresponding opening ports will be closed. 
2.  Each rule is allowed to be used only by one host on LAN synchronously. The trigger 

connection of other hosts on LAN will be refused. 

3.  Incoming Port Range cannot overlap each other. 

Choose menu “Forwarding  → DMZ”, and then you can view and configure DMZ host in the 

screen as shown in Figure 8-42. The DMZ host feature allows one local host to be exposed to the 

Internet for a special-purpose service such as Internet gaming or videoconferencing. DMZ host 

forwards all the ports at the same time. Any PC whose port is being forwarded must have its 

DHCP client function disabled and should have a new static IP Address assigned to it because its 

IP Address may be changed when using the DHCP function.