TP-LINK WiFi Pocket Router/AP/TV Adapter/repeater ユーザーズマニュアル

 

- 234 - 

use the password to browse the built-in web pages to perform Administrator tasks while all the 

others will be blocked.   

After click the Add button, your PC's MAC Address will be placed in the list above. 

Click the Save button to save your settings.   

)

If your PC is blocked but you want to access the Router again, press and hold the WPS button 

for more than 5 seconds to reset the Router to factory defaults. 

You can configure the Remote Management function on this page. This feature allows you to 

manage your Router from a remote location, via the Internet. 

 

Figure 8-48 Remote Management 

¾

 

Web Management Port - Web browser access normally uses the standard HTTP service 

port 80. This router’s default remote management Web port number is 80

.

 For greater 

security, you can change the remote management Web interface to a custom port by 

entering that number in this box provided. Choose a number between 1024 and 65535, but 

do not use the number of any common service port. 

¾

 

Remote Management IP Address - This is the current address you will use when 

accessing your router from the Internet. The default IP Address is 0.0.0.0. It means this 

function is disabled. To enable this function, change the default IP Address to another IP 

Address as desired.   

To access the router, you will type your router's WAN IP Address into your browser's Address (in 

IE) or Location (in Navigator) box, followed by a colon and the custom port number. For example, 

if your Router's WAN address is 202.96.12.8 and you use port number 8080, enter in your 

browser: http://202.96.12.8:8080. You will be asked for the router's password. After successfully 

entering the password, you will be able to access the router's Web-based utility. 

)

Be sure to change the router's default password to a very secure password.