Atlantis Land A02-WRA4-54G ユーザーズマニュアル
I-FLY WIRELESS ROUTER ADSL
23
and Client card settings to generate the same WEP keys. Please note that you do not have to
enter Key (0-3) as below when the Passphrase is enabled.
Default Used WEP Key: Select the encryption key ID, please refer to Key (0-3) below.
Key (0-3): Enter the key to encrypt wireless data. To allow encrypted data transmission, the
WEP Encryption Key values on all wireless stations must be the same as the router.
There are four keys for your selection. The input format is in HEX
[0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F] style, 5 and 13 HEX codes are required for WEP64 and
WEP128 respectively, the separator is “-“.
enter Key (0-3) as below when the Passphrase is enabled.
Default Used WEP Key: Select the encryption key ID, please refer to Key (0-3) below.
Key (0-3): Enter the key to encrypt wireless data. To allow encrypted data transmission, the
WEP Encryption Key values on all wireless stations must be the same as the router.
There are four keys for your selection. The input format is in HEX
[0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F] style, 5 and 13 HEX codes are required for WEP64 and
WEP128 respectively, the separator is “-“.
• WPA Pre Shared Key
WPA Algorithms: TKIP (Temporal Key Integrity Protocol) utilizes a stronger encryption
method and incorporates Message Integrity Code (MIC) to provide protection against hackers.
WPA Shared Key: The key for network authentication. The input format is in character style
and key size should be in the range between 8 and 63 characters.
Group Key Renewal: The period of renewal time for changing the security key automatically
between wireless client and Access Point (AP).
method and incorporates Message Integrity Code (MIC) to provide protection against hackers.
WPA Shared Key: The key for network authentication. The input format is in character style
and key size should be in the range between 8 and 63 characters.
Group Key Renewal: The period of renewal time for changing the security key automatically
between wireless client and Access Point (AP).
3.6.3.1.4 Port Settings
This section allows you to configure the settings for the router’s Ethernet ports to solve some of the
compatibility problems that may be encountered while connecting to the Internet, as well allowing
users to tweak the performance of their network.
compatibility problems that may be encountered while connecting to the Internet, as well allowing
users to tweak the performance of their network.
Port # Connection Type: Five options to choose from: Auto, 10M half-duplex, 10M fullduplex,
100M half-duplex or 100M full-duplex. Sometimes, there are Ethernet compatibility problems with
legacy Ethernet devices, and you can configure different types to solve compatibility issues. The
100M half-duplex or 100M full-duplex. Sometimes, there are Ethernet compatibility problems with
legacy Ethernet devices, and you can configure different types to solve compatibility issues. The