Atlantis Land A02-RAV260-W54 ユーザーズマニュアル
VoIPMaster 260W
13
Chapter 3
Configuration
The ADSL2+ VOIP Router can be configured with your Web browser. The web browser is
included as a standard application in the following operation systems, UNIX, Linux, Mac OS,
Windows 95/98/NT/2000/Me, and etc. The product provides a very easy and user-friendly
interface for configuration.
included as a standard application in the following operation systems, UNIX, Linux, Mac OS,
Windows 95/98/NT/2000/Me, and etc. The product provides a very easy and user-friendly
interface for configuration.
3.1 Before Configuration
This section describes the configuration required by LAN-attached PCs that communicate with
the ADSL2+ VOIP Router, either to configure the device or for network access. These PCs
must have an Ethernet interface installed properly, be connected to the ADSL2+ VOIP Router
either directly or through an external repeater hub, and have TCP/IP installed and configured to
obtain an IP address through a DHCP server or a fixed IP address that must be in the same
subnet of the ADSL2+ VOIP Router.
The default IP address of the ADSL2+ VOIP Router is 192.168.1.254 and subnet mask is
255.255.255.0. The best and easy way is to configure the PC to get an IP address from the
ADSL2+ VOIP Router.
Also make sure you have UNINSTALLED any kind of software firewall that can cause problems
while accessing the 192.168.1.254 IP address of the router.
Please follow the steps below for PC’s network environment installation. First of all, please
check your PC’s network components. The TCP/IP protocol stack and Ethernet network adapter
must be installed. If not, please refer to MS Windows related manuals.
the ADSL2+ VOIP Router, either to configure the device or for network access. These PCs
must have an Ethernet interface installed properly, be connected to the ADSL2+ VOIP Router
either directly or through an external repeater hub, and have TCP/IP installed and configured to
obtain an IP address through a DHCP server or a fixed IP address that must be in the same
subnet of the ADSL2+ VOIP Router.
The default IP address of the ADSL2+ VOIP Router is 192.168.1.254 and subnet mask is
255.255.255.0. The best and easy way is to configure the PC to get an IP address from the
ADSL2+ VOIP Router.
Also make sure you have UNINSTALLED any kind of software firewall that can cause problems
while accessing the 192.168.1.254 IP address of the router.
Please follow the steps below for PC’s network environment installation. First of all, please
check your PC’s network components. The TCP/IP protocol stack and Ethernet network adapter
must be installed. If not, please refer to MS Windows related manuals.
Any TCP/IP capable workstation can be used to communicate with or
through the ADSL2+ VOIP Router. To configure other types of
workstations, please consult the manufacturer’s documentation.
through the ADSL2+ VOIP Router. To configure other types of
workstations, please consult the manufacturer’s documentation.
3.2 Connecting the ADSL2+ VOIP Router
• Connect the ADSL2+ VOIP Router to a LAN (Local Area Network) and the
ADSL/telephone network.
• Power on the device
• Make sure the PWR is lit steady & LAN/ADSL LED is lit.
• Before taking the next step, make sure you have uninstalled any software firewall.
• Make sure the PWR is lit steady & LAN/ADSL LED is lit.
• Before taking the next step, make sure you have uninstalled any software firewall.