Atlantis Land A02-RAV260-W54 ユーザーズマニュアル
VoIPMaster 260W
37
ESSID Broadcast: It is function in which transmits its ESSID to the air so that when wireless
client searches for a network, router can then be discovered and recognized. Default setting is
Enable.
client searches for a network, router can then be discovered and recognized. Default setting is
Enable.
• Disable: If you do not want broadcast your ESSID. Any client uses “any” wireless
setting cannot discover the Access Point (AP) of your router.
• Enable: Any client that using the “any” setting can discover the Access Point (AP) in this
mode.
Regulation Domain: There are seven Regulation Domains for you to choose from, including
North America (N.America), Europe, France, etc. The Channel ID will be different based on
this setting.
Channel ID: Select the ID channel that you would like to use.
Connected: Representing in true or false. That it is the connection status between the system
and the build-in wireless card.
AP MAC Address: It is a unique hardware address of the Access Point.
AP Firmware Version: The Access Point firmware version.
Wireless Distribution System (WDS)
It is a wireless access point mode that enables wireless link and communication with other
access point. It is easy to be installed simply define peer’s MAC address of the connected AP.
WDS takes advantages of cost saving and flexibility which no extra wireless client device is
required to bridge between two access points and extending an existing wired or wireless
infrastructure network to create a larger network.
In addition, WDS enhances its link connection security in WEP mode, WEP key encryption must
be the same for both access points.
WDS Service: The default setting is Disable. Check Enable radio button to activate this
function.
Peer WDS MAC Address: It is the associated AP’s MAC Address. It is important that your
peer’s AP must include your MAC address in order to acknowledge and communicate with each
other.
North America (N.America), Europe, France, etc. The Channel ID will be different based on
this setting.
Channel ID: Select the ID channel that you would like to use.
Connected: Representing in true or false. That it is the connection status between the system
and the build-in wireless card.
AP MAC Address: It is a unique hardware address of the Access Point.
AP Firmware Version: The Access Point firmware version.
Wireless Distribution System (WDS)
It is a wireless access point mode that enables wireless link and communication with other
access point. It is easy to be installed simply define peer’s MAC address of the connected AP.
WDS takes advantages of cost saving and flexibility which no extra wireless client device is
required to bridge between two access points and extending an existing wired or wireless
infrastructure network to create a larger network.
In addition, WDS enhances its link connection security in WEP mode, WEP key encryption must
be the same for both access points.
WDS Service: The default setting is Disable. Check Enable radio button to activate this
function.
Peer WDS MAC Address: It is the associated AP’s MAC Address. It is important that your
peer’s AP must include your MAC address in order to acknowledge and communicate with each
other.
For MAC Address, Semicolon ( : ) must be included