Atlantis Land A02-RA242-W54 ユーザーズマニュアル

                                                                                                                                  WEBSHARE 242W 

31 

PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up services 
using PPP. 
PPPoA stands for Point to Point Protocol over ATM Adaptation Layer 5 (AAL5). It provides 
access control and billing functionality in a manner similar to dial-up services using PPP. 

 

•  Description: A user-definable name for this connection. 
•  VPI/VCI: Enter the information provided by your ISP.  
•  NAT: The NAT (Network Address Translation) feature allows multiple users to access 

the Internet through a single ISP account, sharing a single IP address. If users on your 
LAN have public IP addresses and can access the Internet directly, the NAT function 
can be disabled. 

•  Username: Enter the username provided by your ISP. You can input up to 128 

alphanumeric characters (case sensitive). This is in the format of 
“username@ispname” instead of simply “username”. 

•  Password: Enter the password provided by your ISP. You can input up to 128 

alphanumeric characters (case sensitive). 

•  Service Name: This item is for identification purposes. If it is required, your ISP 

provides you the information. Maximum input is 20 alphanumeric characters. 

•  IP Address:

Your WAN IP address. Leave this at 0.0.0.0 to automatically obtain an IP 

address from your ISP. 

•  Authentication Protocol: Default is Chap. Your ISP advises on using Chap or Pap. 
•  Connection:  

•  Always on: If you want the router to establish a PPPoE session when starting 

up and to automatically re-establish the PPPoE session when disconnected by 
the ISP.