Atlantis Land 111U ユーザーズマニュアル

 

 

40 

2. 

Leave the DNS Server fields in DHCP Setup blank (for example 0.0.0.0). 

The ADSL Router acts as a DNS proxy when this field is blank. 

The ADSL Router has built-in DHCP server capability that assigns IP addresses and 

DNS servers to systems that support DHCP client capability. 

The LAN parameters of the ADSL Router are preset in the factory with the following 

values: 

1. 

IP address of 192.168.1.254 with subnet mask of 255.255.255.0 (24 bits) 

2. 

DHCP server enabled with 100 client IP addresses starting from 

192.168.1.100. 

These parameters should work for the majority of installations. If your ISP gives you 

explicit DNS server address(es), read the embedded web configurator help regarding 

what fields need to be configured. 

Refer to the IP Address and Subnet Mask section in the Wizard Setup chapter for 

this information. 

RIP (Routing Information Protocol) allows a router to exchange routing information 

with other routers. The RIP Direction field controls the sending and receiving of RIP 

packets. When set to: 

1. 

Both - the ADSL Router will broadcast its routing table periodically and 

incorporate the RIP information that it receives. 

2. 

In Only - the ADSL Router will not send any RIP packets but will accept all 

RIP packets received. 

3. 

Out Only - the ADSL Router will send out RIP packets but will not accept 

any RIP packets received.