Atlantis Land A02-RA340 ユーザーズマニュアル

                                                                                                                            

WebShare 340/440  

 

36 

 

There are six items within the System  section:  Time Zone, Remote Access, Firmware 
Upgrade, Backup/Restore, Restart and User Management. 
 

The router does not have a real time clock on board; instead, it uses the Simple Network 
Time Protocol (SNTP) to get the current time from an SNTP server outside your network. 
Choose your local time zone, click Enable and click the Apply button. After a successful 
connection to the Internet, the router retrieves the correct local time from the SNTP server 
you have specified. If you prefer to specify an SNTP server other than those in the drop-
down list, simply enter its IP address as shown above. Your ISP may provide an SNTP 
server for you to use. 
Resync Period (in minutes) is the periodic interval the router waits before it resynchronizes 
the router’s time with that of the specified SNTP server. To avoid unnecessarily increasing 
the load on your specified SNTP server you should keep the poll interval as high as possible  
at the absolute minimum every few hours or even days. 

To temporarily permit remote administration of the router (i.e. from outside your LAN), select 
a time period the router permits remote access for and click Enable. You may change other 
configuration options for the web administration interface using Device Management options 
in the Advanced section of the GUI.