Atlantis Land A02-RA340 ユーザーズマニュアル

                                                                                                                            

WebShare 340/440  

 

 

41 

 
Your router includes a full SPI (Stateful Packet Inspection) firewall for controlling Internet 
access from your LAN, as well as helping to prevent attacks from hackers. In addition to this, 
when using NAT (Network Address Translation. Please see the WAN configuration section 
for more details on NAT) the router acts as a “natural” Internet firewall, as all PCs on your 
LAN will use private IP addresses that cannot be directly accessed from the Internet. 
Firewall: Prevents access from outside your network. The router provides three levels of 
security support: 
NAT natural firewall: This masks LAN users’ IP addresses which are invisible to outside 
users on the Internet, making it much more difficult for a hacker to target a machine on your 
network. This natural firewall is on when NAT function is enabled. 
Firewall Security and Policy (General Settings): Inbound direction of Packet Filter rules to 
prevent unauthorized computers or applications accessing your local network from the 
Internet. 
Intrusion Detection: Enable Intrusion Detection to detect, prevent and log malicious attacks. 
Access Control: Prevents access from PCs on your local network: 
Firewall Security and Policy (General Settings): Outbound direction of Packet Filter rules 
to prevent unauthorized computers or applications accessing the Internet. 
MAC Filter rules: To prevent unauthorized computers accessing the Internet. 
URL Filter: To block PCs on your local network from unwanted websites. 
You can find six items under the Firewall section: General Settings, Packet Filter, Intrusion 
Detection, MAC Address Filter, URL Filter and Firewall Log. 
You can choose not to enable Firewall, to add all filter rules by yourself, or enable the 
Firewall using preset filter rules and modify the port filter rules as required. The Packet Filter 
is divided into two sections: Port Filters and Address Filters, used to filter packets based-on 
Applications (Port) or IP addresses. 
There are four options when you enable the Firewall, they are: 
• All blocked/User-defined: no pre-defined port or address filter rules by default, meaning that 
all inbound (Internet to LAN) and outbound (LAN to Internet) packets will be blocked. Users 
have to add their own filter rules for further access to the Internet. 
• High/Medium/Low security level: the pre-defined port filter rules for High, Medium and Low 
security are displayed in Port Filters of Packet Filter. 
Select either High, Medium or Low security level to enable the Firewall. The only 
difference between these three security levels is the preset port filter rules in the Packet 
Filter. Firewall unfuctionality is the same for all levels; it is only the list of preset port filter that 
changes between each setting. 
If you choose of the preset security levels and then add custom filters, you may temporarily 
disable the firewall and recover your custom filter settings by re-selecting the same security 
level. 
The “Block WAN Request” is a stand-alone function and not relate to whether security 
enable or disable. Mostly it is for preventing any scan tools from WAN site by hacker.