Atlantis Land A02-RI_M02 ユーザーズマニュアル

 

28

       

If you press the Advanced  button from the above Connection Profile Configuration, the 

following screen appears. 

 

Step 1: Set any of the following parameters: 

Data Service: choose 64K, 56K, or Auto. Select Auto unless you know the speed required by 
the other end of the connection requiring either 64K or 56K. 

Remote Sub-Address:   

Caller ID Authentication: select Yes if you want to check the caller ID before accepting the call. 
This service may require a special agreement with your ISDN service provider. 

Caller ID Number: 

STAC Compression: allows outgoing data to be compressed to achieve higher throughput, and 
compressed incoming data to be recognized. The ability to use compression depends on the 
capabilities of the ISP. 

Idle Timeout: the number of seconds of inactivity over the connection. When this value is 
reached, it will disconnect the call. You can set the idle timeout from 0 to 3600 seconds. The 
default setting is 120 seconds. If you select 0, the connection never times out. 

IP RIP:   

Remote IP Address:   

Enable Bridging:   

Step 2: If advanced configuration is required for the operation on the ISDN, and its load sharing