Atlantis Land A02-RA2 ME01 ユーザーズマニュアル

ページ / 46
 
13 
1.10 ROUTER CONFIGURATION
 
WAN 
 
 
The WAN configuration page allows user to set the configuration for the WAN/ADSL ports. 
1. Per VC Settings: Under Per VC Setting, it provides the configurations for IP address, Subnet Mask, 
Gateway and VPI/VCI. Current firmware supports eight PVCs.To switch between the PVCs, please 
choose the options of virtual circuit and click on the Submit button to switch over.
 
2. MAC Spoofing :The MAC Spoofing is developed to solve the scenario when the ISP only 
recognizes one MAC address. Copy the ISP-recognized MAC address here.
 
3. ATM :Service Category: UBR and CBR are supported from the ATM.Bandwidth: Bandwidth 
setting takes effect only when the CBR is selected. The maximum available bandwidth is from the 
upstream data rate of ADSL status page.
 
4. Encapsulation, Bridge, PPP, and DHCP Client 
Use Table 4-1 to configure a valid setting for each PVC. Or go to Appendix page to choose the 
suitable scenario .  
 
Table 4-1 
WAN 
Configuration 
Bridge Mode Router 
Mode 
(PPPoA/PPPoE) 
Router Mode 
(Dynamic IP) 
Router Mode 
(Static IP) 
IP address 
N/A 
Automaticall
y assigned by 
ISP 
Automatically assigned 
by ISP 
Provided by ISP 
Subnet Mask  N/A 
Automaticall
y assigned by 
ISP 
Automatically assigned 
by ISP 
Provided by ISP 
Encapsulation 1483 Bridged 
IP LLC,1483 
Bridged IP 
VC-Mux 
PPPoA 
LLC/VC-
Mux,PPPPoE 
LLC/VC-
Mux 
1483 Bridged/Routed IP 
LLC,1483 
Bridged/Routed IP VC-
Mux, 
Classical IP over ATM 
1483 Bridged/Routed IP 
LLC,1483 Bridged/Routed IP 
VC-Mux, 
Classical IP over ATM 
Bridge Enabled 
Disabled 
Disabled 
Disabled 
PPP Service 
N/A 
Provided by 
ISP 
N/A N/A 
PPP User 
Name 
N/A Provided 
by 
ISP 
N/A N/A 
PPP Password  N/A 
Provided by 
ISP 
N/A N/A 
DHCP Client 
enable 
Unchecked Unchecked Checked 
Unchecked