Buffalo Technology WRB-G54K ユーザーズマニュアル
3
Setting up the Router WBR-G54
■
Note: You can use either a Wired or Wireless connection from the PC
you are using to setup your router. It is strongly recommended you
use the Wired method to avoid possible errors or connection issues
during the initial setup.
use the Wired method to avoid possible errors or connection issues
during the initial setup.
STEP 1. Connecting cables (Refer to Figure 1):
◗
Ensure your Cable or DSL modem, Wireless Router, and the
computer you will be using to setup the Router, are powered
off prior to connecting cables.
off prior to connecting cables.
◗
Locate your DSL or Cable Modem LAN cable and connect it
to the appropriate port on your Modem as per instructions from
your Modem’s manufacturer.
your Modem’s manufacturer.
◗
Connect the other end of this cable to the port marked WAN on
the back of the Router.
Figure 1: Connecting Cables