ZyXEL Communications G-2000s ユーザーズマニュアル
ZyAIR G-2000 Plus Quick Start Guide
20
Wall-mounted
Follow the steps to attach your ZyAIR to a wall.
1.
Locate a high position on the wall that is free of obstructions.
2.
Connect two screws (not included) in the wall 80mm apart. You can use the diagram at the end of
this guide to help you mark the screw holes correctly. Use screws with 6mm ~ 8mm (0.24" ~
0.31") wide heads. Do not screw the screws all the way into the wall. Leave a small gap between
the head of the screws and the wall.
this guide to help you mark the screw holes correctly. Use screws with 6mm ~ 8mm (0.24" ~
0.31") wide heads. Do not screw the screws all the way into the wall. Leave a small gap between
the head of the screws and the wall.
Make sure the screws are securely fixed to the wall and strong enough to
hold the weight of the ZyAIR with the connection cables.
3.
Adjust the cables.
4.
Align the holes on the back of the ZyAIR with the screws on the wall. Hang the ZyAIR on the
screws.
screws.
Figure 11 Wall Mounting the ZyAIR