ZyXEL Communications 650R-31/33 ユーザーズマニュアル

Prestige 650R-31/33 ADSL Router 

11-8 

  Firmware and Configuration File Maintenance 

For details about backup using (T)FTP please refer to earlier sections on FTP and TFTP file upload in this 
chapter. 

Step 1.  Launch the FTP client on your computer. 

Step 2.  Enter “open”, followed by a space and the IP address of your Prestige.   

Step 3.  Press [ENTER] when prompted for a username. 

Step 4.  Enter your password as requested (the default is “1234”). 

Step 5.  Enter “bin” to set transfer mode to binary. 

Step 6.  Find the “rom” file (on your computer) that you want to restore to your Prestige. 

Menu 24.6 -- System Maintenance - Restore Configuration 

To transfer the firmware and configuration file to your workstation, follow the procedure 

below: 

 
1. Launch the FTP client on your workstation. 

2. Type "open" and the IP address of your router. Then type "root" and 

   SMT password as requested. 

3. Type "put backupfilename rom-0" where backupfilename is the name of 

   your backup configuration file on your workstation and rom-0 is the 

   remote file name on the router. This restores the configuration to 
   your router. 

4. The system reboots automatically after a successful file transfer 

 

For details on FTP commands, please consult the documentation of your FTP 

client program. For details on backup using TFTP (note that you must remain 

in this menu to back up using TFTP), please see your router manual. 
 

 

Press ENTER to Exit: