ZyXEL Communications P-660HN-F1 ユーザーズマニュアル

Chapter 3 Status Screens

P-660HN-F1 User’s Guide

Device Information

Host Name

This field displays the ZyXEL Device system name. It is used for identification. You 
can change this in the Maintenance > System > General screen’s System Name 
field.

Model 
Number

This is the model name of your device.

MAC Address

This is the MAC (Media Access Control) or Ethernet address unique to your 
ZyXEL Device.

ZyNOS 
Firmware 
Version

This field displays the current version of the firmware inside the device. It also 
shows the date the firmware version was created. Click this to go to the screen 
where you can change it.

DSL Firmware 
Version

This field displays the current version of the device’s DSL modem code. 

WAN Information

DSL Mode

This is the DSL standard that your ZyXEL Device is using.

IP Address

This field displays the current IP address of the ZyXEL Device in the WAN. Click 
this to go to the screen where you can change it.

IP Subnet 
Mask

This field displays the current subnet mask in the WAN.

Default 
Gateway

This is the IP address of the default gateway, if applicable. 

VPI/VCI

This is the Virtual Path Identifier and Virtual Channel Identifier that you entered in 
the wizard or WAN screen.

LAN Information

IP Address

This field displays the current IP address of the ZyXEL Device in the LAN. Click 
this to go to the screen where you can change it.

IP Subnet 
Mask

This field displays the current subnet mask in the LAN.

DHCP

This field displays what DHCP services the ZyXEL Device is providing to the LAN. 
Choices are:
Server - The ZyXEL Device is a DHCP server in the LAN. It assigns IP addresses 
to other computers in the LAN.
Relay - The ZyXEL Device acts as a surrogate DHCP server and relays DHCP 
requests and responses between the remote server and the clients.
None - The ZyXEL Device is not providing any DHCP services to the LAN.
Click this to go to the screen where you can change it.

WLAN 
Information

SSID

This is the descriptive name used to identify the ZyXEL Device in a wireless LAN. 
Click this to go to the screen where you can change it.

Channel

This is the channel number used by the ZyXEL Device now.

Security

This displays the type of security mode the ZyXEL Device is using in the wireless 
LAN.

WPS

This displays whether WPS is activated. Click this to go to the screen where you 
can configure the settings.

Status

This displays whether WLAN is activated.

Security

Table 4   Status Screen