ZyXEL Communications ZyWALL 1000 ユーザーズマニュアル

 Chapter 4 Wizard Setup

ZyWALL USG 1000 User’s Guide

"

Enter the Internet access information exactly as given to you by your ISP.

Type the User Name given to you by your ISP.

User Name

Type the user name given to you by your ISP. You can use alphanumeric and -

_

@$./

 characters, and it can be up to 31 characters long.

Password

Type the password associated with the user name above. Use up to 64 ASCII 

characters except the [] and ?. 

Retype to Confirm

Type your password again for confirmation.

Nailed-Up Select 

Nailed-Up if you do not want the connection to time out.

Idle Timeout

Type the time in seconds that elapses before the router automatically 

disconnects from the PPTP server. 

PPTP 

Configuration

Base Interface

This displays the identity of the Ethernet interface you configure to connect with a 

modem or router. 

Base IP Address

Type the (static) IP address assigned to you by your ISP.

IP Subnet Mask

Type the subnet mask assigned to you by your ISP (if given).

Server IP

Type the IP address of the PPTP server.

Connection ID

Enter the connection ID or connection name in this field. It must follow the "c:id" 

and "n:name" format. For example, C:12 or N:My ISP. 

This field is optional and depends on the requirements of your DSL modem. 
You can use alphanumeric and -_

:

 characters, and it can be up to 31 characters 

long. This field can be blank.

WAN IP Address 

Assignments

WAN Interface

This displays the identity of the interface you configure to connect with your ISP.

Zone

This field displays to which security zone this interface and Internet connection 

will belong.

IP Address

Enter your WAN IP address in this field. 

DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice 

versa. The DNS server is extremely important because without it, you must know the IP address of a 

computer before you can access it. The ZyWALL uses a system DNS server (in the order you specify 

here) to resolve domain names for VPN, DDNS and the time server.

First DNS Server
Second DNS 

Server

Enter the DNS server's IP address(es) in the field(s) to the right.
Leave the field as 0.0.0.0 if you do not want to configure DNS servers. If you do 

not configure a DNS server, you must know the IP address of a machine in order 

to access it.

Next

Click Next to continue. 

Table 12   PPTP Encapsulation: Static (continued)