ZyXEL Communications MAX-306M1 ユーザーズマニュアル

 Chapter 11 The System Configuration Screens

User’s Guide

When the WiMAX Modem restores a configuration file, the device automatically 
restarts. This causes a temporary network disconnect. 

Note: Do not turn off the device while configuration file upload is in progress.

If the WiMAX Modem’s IP address is different in the configuration file you selected, 
you may need to change the IP address of your computer to be in the same 
subnet as that of the default management IP address (192.168.5.1). See the 
Quick Start Guide or the appendices for details on how to set up your computer’s 
IP address.

You might have to open a new browser to log in again.

If the upload was not successful, you are notified by Configuration Upload 
Error message:

Click Return to go back to the Configuration screen.

Click ADVANCED > System Configuration > Restart to reboot the WiMAX 
Modem without turning the power off.

Note: Restarting the WiMAX Modem does not affect its configuration.

Figure 55   ADVANCED > System Configuration > Restart

The following table describes the labels in this screen.    

Table 42   ADVANCED > System Configuration > Restart

Restart 

Click this button to have the device perform a software restart. The 
Power LED blinks as it restarts and the shines steadily if the restart is 
successful.

Note: Wait one minute before logging back into the WiMAX Modem 

after a restart.