ZyXEL Communications 1001H ユーザーズマニュアル

2-11

isdn initstring set AT&ZOx=number

where x is 'I' for ISDN data calls, 'A' for A/B Adapter 1 and 'B' for A/B Adapter 2. For instance,

isdn initstring set AT&ZOI=100&ZOA=101&ZOB=102

sets the calling party number to 100 for ISDN data calls, 101 for A/B adapter 1 and 102 for A/B adapter 2.

Switch Type

In general, this is Switch/Switch. If you are only using one B channel
(e.g., your Prestige is sharing the ISDN BRI line with another device
on the S/T bus), then select Switch/Unused. The default is
Switch/Switch. The options for this field are:

B Channel Usage

♦  Switch/Switch
♦  Switch/Lease
♦  Leased/Switch

♦  Leased/Unused
♦  Unused/Leased
♦  Leased/Leased

♦  Switch/Unused

ISDN Data &
Subaddress

Enter the telephone number and the subaddress assigned to ISDN
data calls for the Prestige. The maximum number of digits is 25 for the
telephone number and 5 for the subaddress.

A/B Adapter 1 &
Subaddress

Enter the telephone number and the subaddress assigned to A/B
Adapter 1 (PHONE1).

A/B Adapter 2 &
Subaddress

Same as above for A/B Adapter 2 (PHONE2).

Menu 2 - ISDN Setup

Switch Type: DSS-1(Taiwan)
B Channel Usage= Switch/Switch

ISDN Data     =
A/B Adapter 1 =
A/B Adapter 2 =
A/B Adapter 2 Accepts Modem Call= Disable

Subaddress=
Subaddress=
Subaddress=

PABX Outside Line Prefix =
Outgoing Calling party Number =
Incoming Phone Number Matching= Multiple Subscriber Number (MSN)
  Analog Call Routing= N/A
  Global Analog Call= N/A

           Edit Advanced Setup = No

Press ENTER to Confirm or ESC to Cancel: