ZyXEL Communications 1001H ユーザーズマニュアル
P100IH ISDN Router
Internet Access
3-5
Follow the instructions in the following table on how to configure the DHCP fields.
Table 3-1 DHCP Ethernet Setup Menu Fields
Field
Description
Example
DHCP Setup
DHCP=
This field enables/disabled the DHCP server. If it is set to
Server, your Prestige will act as a DHCP server. If set to None,
DHCP server will be disabled. If the Prestige 100IH is set to
Relay, it will act as a surrogate DHCP server where it relays IP
address assignment from the actual real DHCP server to the
clients.
Server, your Prestige will act as a DHCP server. If set to None,
DHCP server will be disabled. If the Prestige 100IH is set to
Relay, it will act as a surrogate DHCP server where it relays IP
address assignment from the actual real DHCP server to the
clients.
When DHCP is used, the following four items need to be set:
None
Server (default)
Relay
Client IP Pool Starting
Address
This field specifies the first of the contiguous addresses in the
IP address pool.
IP address pool.
192.168.1.33
Size of Client IP Pool
This field specifies the size, or count, of the IP address pool.
32
Primary DNS Server
Secondary DNS
Server
Server
Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and
the subnet mask.
are passed to the DHCP clients along with the IP address and
the subnet mask.
Relay Server
Address=
Address=
If you chose Relay in the DHCP= field above, then enter the IP
of the actual DHCP server from which the Prestige will relay
requests and responses here.
of the actual DHCP server from which the Prestige will relay
requests and responses here.