ZyXEL Communications 1000 ユーザーズマニュアル
Chapter 7 Tutorials
ZyWALL USG 1000 User’s Guide
122
3
Click Dashboard, and look at the Interface Status Summary. Ethernet
interface ge4 has a status of Port Group Up if it is connected or Port Group
Down if it is not connected. Ethernet interfaces ge5 has a Status of Port Group
Inactive.
interface ge4 has a status of Port Group Up if it is connected or Port Group
Down if it is not connected. Ethernet interfaces ge5 has a Status of Port Group
Inactive.
Figure 71 Dashboard: Interface Status Summary After Port Grouping
7.2 How to Configure a Cellular Interface
Use 3G cards for cellular WAN (Internet) connections.
lists
the compatible 3G devices. In this example you install or connect the 3G card
before you configure the cellular interfaces but is also possible to reverse the
sequence.
before you configure the cellular interfaces but is also possible to reverse the
sequence.
1
Make sure the 3G device’s SIM card is installed.
2
Install the 3G device in the ZyWALL’s PCIMCIA slot or connect it to one of the
ZyWALL’s USB ports.
ZyWALL’s USB ports.
3
Click Configuration > Network > Interface > Cellular. Select the 3G device’s
entry and click Edit.
entry and click Edit.
Figure 72 Configuration > Network > Interface > Cellular