ZyXEL Communications 1000 ユーザーズマニュアル
Chapter 7 Tutorials
ZyWALL USG 1000 User’s Guide
164
7.13.2 Configure the Policy Route
Now you need to configure a policy route that has the ZyWALL use the range of
public IP addresses as the source address for WAN to LAN traffic.
public IP addresses as the source address for WAN to LAN traffic.
Click Configuration > Network > Routing > Add.
Although adding a description is optional, it is recommended. This example uses
LAN-to-WAN-Range.
LAN-to-WAN-Range.
Specifying a Source Address is also optional although recommended. This
example uses LAN_SUBNET.
example uses LAN_SUBNET.
Set the Source Network Address Translation to Public-IPs and click OK.
Figure 126 Configuring the Policy Route
7.14 How to Use Active-Passive Device HA
Here is an example of using device HA (High Availability) to backup ZyWALL A (the
master) with ZyWALL B. ZyWALL B automatically takes over all of A’s functions if
A fails or loses its ge1 or ge2 connection.
master) with ZyWALL B. ZyWALL B automatically takes over all of A’s functions if
A fails or loses its ge1 or ge2 connection.