ZyXEL Communications 1000 ユーザーズマニュアル

 Chapter 13 Interfaces

ZyWALL USG 1000 User’s Guide

This screen lets you configure IP address assignment, interface bandwidth 
parameters, DHCP settings, and connectivity check for each VLAN interface. To 
access this screen, click the Add icon at the top of the Add column or click an 
Edit icon next to a VLAN interface in the VLAN Summary screen. The following 
screen appears.

IP Address

This field displays the current IP address of the interface. If the IP address is 
0.0.0.0, the interface does not have an IP address yet.

This screen also shows whether the IP address is a static IP address 
(STATIC) or dynamically assigned (DHCP). IP addresses are always static 
in virtual interfaces.

Mask

This field displays the interface’s subnet mask in dot decimal notation.

Apply

Click Apply to save your changes back to the ZyWALL.

Reset

Click Reset to return the screen to its last-saved settings. 

Table 66   Configuration > Network > Interface > VLAN (continued)