ZyXEL Communications 1000 ユーザーズマニュアル

Chapter 16 Routing Protocols

ZyWALL USG 1000 User’s Guide

) has the Type set to Normal, a Virtual Link table displays. Click either the Add 

icon or an entry and the Edit icon to display a screen like the following.

Figure 284   Configuration > Network > Routing > OSPF > Add > Add

The following table describes the labels in this screen.  

Here is more detailed information about RIP and OSPF.

Table 91   Configuration > Network > Routing > OSPF > Add > Add

Peer Router ID

Enter the 32-bit ID (in IP address format) of the other ABR in the virtual 
link.

Authentication

Select the authentication method the virtual link uses. This 
authentication protects the integrity, but not the confidentiality, of 
routing updates. 

None uses no authentication.

Text uses a plain text password that is sent over the network (not very 
secure). 

MD5 uses an MD5 password and authentication ID (most secure). 

Same as Area has the virtual link also use the Authentication 
settings above.

Text 
Authentication 
Key

This field is available if the Authentication is Text. Type the password 
for text authentication. The key can consist of alphanumeric characters 
and the underscore, and it can be up to 8 characters long.

MD5 
Authentication 
ID

This field is available if the Authentication is MD5. Type the default ID 
for MD5 authentication in the area. The ID can be between 1 and 255.

MD5 
Authentication 
Key

This field is available if the Authentication is MD5. Type the default 
password for MD5 authentication in the area. The password can consist 
of alphanumeric characters and the underscore, and it can be up to 16 
characters long.

OK

Click OK to save your changes back to the ZyWALL.

Cancel

Click Cancel to exit this screen without saving.