ZyXEL Communications 100-NH ユーザーズマニュアル

Chapter 7 LAN and VLAN

NWA1000 Series User’s Guide

Use this screen to configure the IP address for your NWA. Click Network > LAN to display the 
following screen.

LAN IP

The following table describes the labels in this screen.

LAN IP

IPv4 Address 
Assignment 

Obtain IP Address 
Automatically 

Select this option if your NWA is using a dynamically assigned IPv4 address from a 
DHCP server each time. 

Note: You must know the IP address assigned to the NWA (by the DHCP server) to 

access the NWA again. 

Use Fixed IP Address

Select this option if your NWA is using a static IPv4 address. When you select this 
option, fill in the fields below.

IP Address

Enter the IP address of your NWA in dotted decimal notation. 

Note: If you change the NWA's IP address, you must use the new IP address if you 

want to access the web configurator again.

Subnet Mask

Type the subnet mask.

Gateway IP 

Address 

Type the IPv4 address of the gateway. The gateway is an immediate neighbor of your 
NWA that will forward the packet to the destination. On the LAN, the gateway must 
be a router on the same segment as your NWA; over the WAN, the gateway must be 
the IP address of one of the remote nodes.