Alcatel Carrier Internetworking Solutions Switch/Router ユーザーズマニュアル

Running Frame Fabric Tests on Omni Switch/Routers

Page 36-19

Test Coverage:

All Fabric Inputs/Outputs not tested:

Fabric in slot 2 (ESX-C12) has 9 inputs (0-8) and 1 output (0)
All inputs tested
All Outputs tested

Fabric in slot 3 (ESX-C12) has 9 inputs (0-8) and 1 output (0)
All inputs tested
All Outputs tested

Fabric in slot 4 (ESX-C12) has 9 inputs (0-8) and 1 output (0)
All inputs tested
All Outputs tested

Fabric in slot 5 (ESX-C12) has 9 inputs (0-8) and 1 output (0)
All inputs tested
All Outputs tested

Fabric in slot 6 (ESX-C12) has 9 inputs (0-8) and 1 output (0)
All inputs tested
All Outputs tested

Fabric in slot 7 (ESX-C12) has 9 inputs (0-8) and 1 output (0)
All inputs tested
All Outputs tested

Fabric in slot 8 (ESX-C12) has 9 inputs (0-8) and 1 output (0)
All inputs tested
All Outputs tested

Fabric in slot 9 (ESX-C32) has 9 inputs (0-8) and 1 output (0)
All inputs tested
All Outputs tested

Completed: WED OCT 28 16:24:04 2000

If you need to halt the

framefab

tests, press

CTRL-C

. This key sequence pauses the testing and

provides a test summary report. You will be prompted to restart the testing after the pause.

♦ Note ♦

During certain phases of diagnostic testing, the

CTRL-C

will not be immediately processed. This delay may last
several seconds, or longer.

If your chassis is not fully loaded, the

framefab

test will report that the frame fabric in the

empty slot was not tested.