Alcatel Carrier Internetworking Solutions Switch/Router ユーザーズマニュアル

Page 6-6

Enter an 

IP

 address for the Ethernet management port in dotted decimal or hexadecimal nota-

tion (the default is 

). For example, to change the Ethernet management port’s IP 

address to 

, enter

at the prompt.

♦ Note ♦

This 

IP

 address must not be on the same subnet as any 

other 

IP

 router on the switch.

Enter an 

IP

 subnet mask in dotted decimal or hexadecimal notation (the default is 

). If no mask is provided, the switch will try to determine the mask using Inter-

net Control Message Protocol (

ICMP

) requests. For example, to change the subnet mask to 

, enter

at the prompt.

The default broadcast address is automatically derived from the default 

VLAN IP

 address class 

(the default is 192.255.255.255). You can enter a new address in dotted decimal or hexadeci-
mal notation. For example, to change the broadcast address to 

, enter

at the prompt.

You can enter an 

IP

 address for the first hop router to a remote host (if the host is on a differ-

ent 

IP

 net) in dotted decimal or hexadecimal notation. The default is 192.168.1.1. For exam-

ple, to change this address to 

, enter

at the prompt.

You can enter an 

IP

 address for a a remote host (if the host is on a different 

IP

 net) in dotted 

decimal or hexadecimal notation. The default is 192.168.1.1. For example, to change this 
address to 

, enter

at the prompt.

This parameter is an informational field, which shows that the 

RIP

 mode is inactive. You 

cannot modify this parameter.