Alcatel Carrier Internetworking Solutions Switch/Router ユーザーズマニュアル

Page 7-5

You can use the 

 command to delete all executable (image) files. The files deleted by 

the 

 command include the 

MPX

 boot file (

), and all executable switching module 

files (the factory default is all files ending with the 

 extension).

♦ Important ♦

You should only use the 

 command during 

network down times and when you are connected to 
the switch through the serial port.

To use this command, enter

at the system prompt. A screen similar to the one shown below will be displayed.

Press the 

 key to delete all the image files or press 

 to cancel. If you press the 

 key, 

the switch will spend several minutes deleting the image files.

♦ Note ♦

If you want to delete all files in flash memory, you can 
use the 

 command, which is described in Creat-

After you have deleted all the old image files, you must load new image files using 

FTP

 or 

ZMODEM

 so the switch can function. See Chapter 5, “Installing Switch Software,” for instruc-

tions on using the 

 and 

 commands.