Alcatel Carrier Internetworking Solutions Switch/Router ユーザーズマニュアル
Managing User Login Accounts
Page 8-17
This screen displays the default privileges for a new user login account. Note that the default
privileges give the new user neither read nor write permission. To grant privileges to the user
account, enter a number from 1 to 5 as indicated in the display. To set
privileges give the new user neither read nor write permission. To grant privileges to the user
account, enter a number from 1 to 5 as indicated in the display. To set
WRITE
privileges for a
single family of commands, enter
1
and press
<Enter>
. The display will prompt you for the
family number as shown here:
Give the family number : ( ) :
Enter the number of the command family for which you want to set
WRITE
privileges. Refer to
For example, if you wanted to enable
WRITE
privileges for the Bridge command family, enter
the number
5
as shown here.
Give the family number : ( ) : 5
The following will display.
Give rights on family BRIDGE
0.NO
1.READ
2.WRITE
3.READ&WRITE
1.READ
2.WRITE
3.READ&WRITE
( ) :
Enter the number
2
at the prompt to assign
WRITE
privileges. The following shows a portion
of the display.
User ‘TechPubs1’ user privileges (0:0X20:0) :
- CONFIG
: NO
- GROUP
: NO
- IPROUT
: NO
- IPXROUT
: NO
- BRIDGE
: READ & WRITE
- SNMP
: NO
- XSWITCH
: NO
(Continued)
The privilege listed next to Bridge shows
WRITE
. This indicates that the user ‘‘TechPubs1’’
now has
WRITE
privileges for the Bridge family of commands.