Alcatel Carrier Internetworking Solutions Switch/Router ユーザーズマニュアル

Page 19-44

You can add virtual ports to a Group at any time after the Group is created. The 

 

command allows you to add one or more ports to a Group you specify. If you have used the 

 command to add virtual ports, then you will find the 

 command fields very famil-

iar.

To use 

, enter the command followed by the Group number to which you want to add 

the port. Next, specify the port or ports you want to add.

For example, if you wanted to add ports 4 through 6 on the module in slot 4 to Group #5, 
then you would specify:

The procedure for using 

 is as follows:

1. Enter 

 followed by the Group number where you want this port to reside, followed 

by the physical slot and port numbers you want to configure.

2. If you enter a port that is already assigned to another Group, then you will be prompted 

on whether or not you want to change its assignment. A message similar to the following 
displays for each port that you enter:

Simply enter a 

 at each port prompt to change its Group assignment and begin setting 

port parameters. You could also enter a 

 at this prompt to accept all default port parame-

ters and skip port configuration questions. If you enter a 

, all remaining ports are auto-

matically added to the Group with default settings, and your work is complete.

3. The virtual port configuration menu displays:

Descriptions for each of the fields in this display begin on page 19-29. To change any 
default value, enter the line number for the item, an equal sign (=), and then the value for 
the parameter. When you have completed the configuration for this port, enter 

 to 

save all configured settings.