Alcatel Carrier Internetworking Solutions Switch/Router ユーザーズマニュアル
Priority VLANs
Page 19-74
Configuring VLAN Priority
To configure the priority of a VLAN:
1. Enter the
prty_mod
command at the system prompt, as shown:
prty_mod <groupId>
where
<groupId>
is the group number associated with the VLAN whose priority is being
set. For example, to modify the priority of the VLAN for Group 2, you would enter the
following:
following:
prty_mod 2
The following prompt is shown:
Enter a priority value which is between 0 and 7: 0
2. Enter the number value that is to be the new priority level for this VLAN. The highest
(most important) value is 7.
3. Press
<enter>
. A message similar to the following is displayed:
Priority for VLAN 2 has been set as 7
Viewing VLAN Priority
The priority level for all configured VLANs can be viewed by using the
prty_disp
command.
Enter the
prty_disp
at the system prompt, as shown:
prty_disp <groupId>
where
<groupId>
is the group number associated with the VLAN whose priority is being
viewed. For example, to view the priority of the VLAN for Group 2, you would enter the
following:
following:
prty_disp 2
A display similar to the following is shown:
The priority of group 2 is 7
As a variation of this command, you can enter
prty_disp
at the system prompt without a group
number. This will display the priority of all VLANs.