Alcatel Carrier Internetworking Solutions Switch/Router ユーザーズマニュアル

Page 2-5

The 

MPX

 also supports an out-of-band Ethernet port for high-speed uploads and switch 

management functions. With this port, you can access the Omni Switch/Router over a 
network via Telnet or 

FTP

. 

You can use the Boot prompt to configure an 

IP

 address for the Ethernet management port or 

you can use the 

 command, which is described in Chapter 6, “Configuring Manage-

ment Processor Modules.” After you have assigned an IP address to the Ethernet manage-
ment port, you can use it to Telnet into the 

UI

.

See Appendix A, “The Boot Line Prompt,” for documentation on configuring the Ethernet 
management port with the boot prompt.

♦ Important Note ♦

On some revisions of the 

MPX

, you must configure the 

Ethernet management port with the boot prompt before 
you can use the 

 command.

See the table on the following page for available Ethernet management port types.

1

Not Used

2

RD

To MPX

3

TD

From MPX

4,

DTR

From MPX

5

GND

6

DSR

To MPX

7

RTS

From MPX

8

CTS

To MPX

9

Not used

Shell

Shield GND

1

5

6

9