Alcatel Carrier Internetworking Solutions Switch/Router ユーザーズマニュアル

Page 26-20

Use this parameter to list, add, or delete 

VLANs

 to which the 

NBNS UDP

 relay will forward. 

This default is 

. This value redisplays as

when at least one 

VLAN

 is configured. Up 

to 32 

VLANs

 may be configured. You can list forwarding 

VLANs

, or add or delete 

VLANs

 from 

the forwarding list by entering 

, 

, or 

 on the command line.

To configure a generic service:

1. On the Add new Generic Service menu, enter a description of the generic service. For 

example:

2. Enter the relevant 

UDP

 port number. For example:

3. At least one next-hop address must be configured. To add an address, enter:

The screen displays similar to the following:

4. Enter the next-hop address in dotted decimal format (i.e., 198.206.181.12), a hexadecimal 

address (i.e., 0xc6ceb501). A host name (i.e., system.com) may be entered if the 

DNS

 

resolver is enabled using the 

 command.

5. When you are finished entering next-hop addresses, press 

 to return to the prompt 

for the Add new Generic Services menu. 

6. Select any 

VLANs

 for the relay to forward to. At the prompt, enter

A screen similar to the following displays:

7. Enter the item number of the group/

VLAN

 that you want to select. Repeat this step for all 

the groups/

VLANs

 you want to select. An asterisk displays next to all selected 

VLANs

.

8. Press 

 to return to the Add new Generic Services menu. Add any other generic 

services in this way. 

9. Enter 

 to keep the current changes and return to the Generic Services menu. Enter 

 to 

return to the UDP Relay Configuration screen.

10. Enter 

 to save the changes and reinitialize the relay.