Alcatel Carrier Internetworking Solutions Switch/Router ユーザーズマニュアル
Obtaining Status and Statistical Information
Page 29-42
Information on the Ports for One WSX Board
To obtain status information on a single
WSX
board, you enter the
frstatus
command along
with the slot number for the
WSX
board, as follows:
frstatus <slot>
where
<slot>
is the slot number where the
WSX
board is installed. For example, if you wanted
to obtain status information for the board in slot 4, you would enter:
frstatus 4
This command displays a screen similar to the following:
Frame Relay Status for slot: 4
Admin/
VCs
Oper
Intf
Speed
Active/
Frames Frames
Octets
Octets
PTStatus
Type
BPS
Inactive
In
Out
In
Out
== ======
====
======= ========
====== =======
========
=======
1 UP/UP V35DTE 2048000
2/0
364
128
8962
2650
2 DN/DN *NONE*
9600
0/0
0
0
0
0
3 UP/DN 232DTE
56000
0/0
89
90
890
895
4 UP/UP V35DTE
256000
19/1
9
21
124
245
Each row in the table corresponds to a port on the
WSX
you requested information on.
PT
The Port number on the
WSX
board for which statistics are displayed.
Admin/Oper Status, Int Type, Speed Bps, DLCI Active/Inactive
These columns are described in the section, Information on All Boards in a Switch on page
29-38. Please refer to this section for detailed information.
29-38. Please refer to this section for detailed information.
Frames In
The total number of frames received on this port since the last time the switch was initialized.
Frames Out
The total number of frames sent on this port since the last time the switch was initialized.
Octets In
The total number of Octets, or bytes, received on this port since the last time the switch was
initialized. This statistic includes the data and Frame Relay header fields, but does not include
CRC or flag characters.
initialized. This statistic includes the data and Frame Relay header fields, but does not include
CRC or flag characters.
Octets Out
The total number of Octets, or bytes, sent on this port since the last time the switch was
initialized. This statistic includes the data and Frame Relay header fields, but does not include
CRC or flag characters.
initialized. This statistic includes the data and Frame Relay header fields, but does not include
CRC or flag characters.