Alcatel Carrier Internetworking Solutions Switch/Router ユーザーズマニュアル

Page 30-6

The WAN menu contains a submenu, named 

, containing commands specific to the Point-

to Point-Protocol (PPP). 

To display the 

menu, enter the following commands:

A screen similar to the following displays:

Your first configuration step is to create a global PPP configuration record using the 

 command. This global record is used to provide default settings to be used for 

incoming calls. Then, you can add individual PPP configuration records (called “PPP Entities”) 
for each peer (i.e., for each remote site) with which you wish to be able to establish a point-
to-point connection. You will need to know specific information about the remote peers with 
which you wish to connect in order to successfully configure the PPP Entity. 

After you have configured at least one PPP Entity, you can use the other commands on the 
PPP Menu to modify, delete, view, and display its operational status. You can then add PPP 
Entities as you need them to support additional PPP connection requirements.

When a port is configured for PPP via the 

 command, a PPP entity and a WAN link entry 

are created automatically. For more information, see Chapter 28 titled “Managing WAN 
Switching Modules.”