Agilent Technologies 20ET ユーザーズマニュアル
4-6
Printing, Plotting, and Saving Measurement Results
Defining a Print Function
Defining a Print Function
NOTE
The print definition is set to default values whenever the power is cycled.
However, you can save the print definition by saving the instrument state.
However, you can save the print definition by saving the instrument state.
1. Press
.
2. Press
or
.
❏ Choose
if you are using a black and white printer, or you
want just black and white from a color printer.
❏ Choose
if you are using a color printer.
3. Press
until the correct choice (ON or OFF) is highlighted.
❏ Choose
if you want to print one measurement per page.
❏ Choose
if you want to print multiple measurements per page.
NOTE
Laser printers and some DeskJet printers do not begin to print until a full
page, or a partial page and a form feed, have been received.
page, or a partial page and a form feed, have been received.
If You Are Using a Color Printer
1. Press .
2. If you want to modify the print colors, select the print element and then choose an
available color.
NOTE
You can set all the print elements to black to create a hardcopy in black and
white.
white.
Since the media color is usually white or clear, you could set a print element
to white if you do not want that element to appear on your hardcopy.
to white if you do not want that element to appear on your hardcopy.
Copy
DEFINE PRINT
PRINT: MONOCHROME
PRINT: COLOR
PRINT: MONOCHROME
PRINT: COLOR
AUTO-FEED
AUTO-FEED ON
AUTO-FEED OFF
PRINT COLORS