HP (Hewlett-Packard) E3000 MPE/IX ユーザーズマニュアル

Introductory Screens

The Network Transport Configuration screen (#42) in Figure 5-5 is
displayed if you press the

 key at the NS Configuration

Step 1. Next to the words

Enter a network interface:

, enter a name for the

selected network interface (for example, LANNI).

Step 2. Next to the words

Enter a network type:

, enter the selected network

type number indicated on the above screen. (For example, enter a

1

 to

indicate that the NI is a LAN NI.)

Step 3. Press the

 key. (There may be a short pause before the

next screen appears.)

Step 4. Proceed to the chapter of the network interface selected above for

screen information. Refer to Chapter 6 , “Configuring a LAN Node,” for
information on LAN, Token Ring, FDDI, 100VG-AnyLAN, and
100Base-T; and other chapters for information on Point-to-Point, X.25,
and Gateway Half respectively.