HP (Hewlett-Packard) E3000/IX ユーザーズマニュアル
171
13
Configuring Logging
This chapter provides step-by-step instructions for configuring logging.
Logging is configured for the purpose of recording events such as errors
and console commands.
Logging is configured for the purpose of recording events such as errors
and console commands.
Figure 13-1 shows the screen flow for configuring the logging screens.
Screens unique to logging are indicated by bold boxed screens.
Screens unique to logging are indicated by bold boxed screens.
[FUNCTION]
denotes the function key used at a screen to invoke the next
screen on the screen flow.
Figure 13-1
Logging Configuration Screen Flow
Link Selection
Network Log
Config (6)
[NEXT SCREEN]
[NEXT SCREEN]
Network Log
Config (5)
Main Screen
NS Config
Link Selection
Network Log
Config (2)
Unguided Config
[OPEN CONFIG]
[NS]
[UNGUIDED]
[GO TO LOGGING]
[NEXT SCREEN]
If you have not created the
config file, then press the
OPEN CONFIG key a
second time.
config file, then press the
OPEN CONFIG key a
second time.
Network Log
Config (1)
Link Selection
Network Log
Config (4)
[NEXT SCREEN]
[NEXT SCREEN]
Network Log
Config (3)
Link Selection
Logging Config:
Class Data
To enable users for individual logging
classes, in the command window of any
screen, type the path name:
@LOGGING.SUB
classes, in the command window of any
screen, type the path name:
@LOGGING.SUB
nnnn.CLASnnnn and
hit enter.
[EXIT LOGGING]
[PRV LOG SCREEN]
[PRV LOG SCREEN]
[PRV LOG SCREEN]
[PRV LOG SCREEN]
[PRV LOG SCREEN]
Network Log
Config (7)
[NEXT SCREEN]
[PRV LOG SCREEN]
Open Config/
Directory File Screen
Link Selection
Logging Config:
Class Data