HP (Hewlett-Packard) E3000/IX ユーザーズマニュアル

NS X.25 Migration: NS 3000/V to NS 3000/iX

To use the NMMGRVER utility to convert your NS 3000/V
configuration file to NS 3000/iX release 2.0 or later, proceed as follows:

Step 1. At the MPE/iX prompt, type:

NMMGRVER.PUB.SYS

 and answer the

questions.

Step 2. Do either steps a through c or steps d through g.

If your NS 3000/V node had only an

NMCONFIG

file (but no

NSCONF

files),

follow the instructions in steps a through c.

a. To convert the

NMCONFIG

 file enter the file name:

NMCONFIG.PUB.SYS

.

b. Enter

Y

 to proceed when prompted.

c. Select type

2

 for

NMCONFIG

 type file. The converted file will be saved

with the file name you entered. In this case it is

NMCONFIG.PUB.SYS

.

This is the only filename that the node will recognize as its
configuration file.

If your NS 3000/V node had one or more

NSCONF

 files, follow the

instructions in steps d through g.

d. Merge your NS 3000/V

NSCONF

 file with the NS 3000/V

NMCONFIG

file, and convert it for use with NS 3000/iX release 2.0 or later by
entering a file name, for example:

NSCONF1.PUB.SYS

.

e. Enter

Y

to proceed when prompted.

f. Select type

1

 for

NSCONF

 type file. NMMGRVER will merge the

contents of the existing

NMCONFIG

 file with the

NSCONF

 file you

specified. It will be saved in the

NSCONF

 file you specified. In this

example,

NSCONF1

.

g. If you converted more than one

NSCONF

file, decide which one will be

the network configuration you want on the NS 3000/iX system.
Rename the file to

NMCONFIG.PUB.SYS

.

On the NS 3000/iX host, use NMMGR to change the following
parameters to provide X.25 XL System Access:

1. If migrating from any NS 3000/V release before release V delta 7,

modify the screen at path

@NETXPORT.NI.

niname

.PROTOCOL.X25

 to

change the inactivity timer from minutes to seconds.

2. On the screen with the path

@LINK

, verify that the

DTSLINK

 is

defined.