Netgear XAVB1601-100NAS ユーザーズマニュアル
5
Button Descriptions
Item
Description
Factory
Reset
button
Reset
button
Press the Factory Reset button for 1 second, and release it to
return the Powerline adapter to its factory default settings.
return the Powerline adapter to its factory default settings.
Security
button
button
• After you plug in your new AV adapter, press the Security
button for 2 seconds, and then press the Security button on
one of the other AV adapters in your existing network for 2
seconds. Both buttons must be pressed within 2 minutes.
one of the other AV adapters in your existing network for 2
seconds. Both buttons must be pressed within 2 minutes.
• Press the Security button for 10 seconds to put the adapter
into power saving mode. Press the Security button again
for 0.5 seconds to wake it.
for 0.5 seconds to wake it.
Filtered
AC Socket
AC Socket
The filtered AC socket can remove some electrical noise that
might affect Powerline performance. Plugging the power plugs
of nearby devices into the filtered AC socket might improve
performance.
might affect Powerline performance. Plugging the power plugs
of nearby devices into the filtered AC socket might improve
performance.
Warning:
Do not press the Security/Power button on the Powerline adapter
until installation is complete, and the adapters are communicating with each
other (indicated by the blinking Powerline LED). Pressing this button too soon
can temporarily disable Powerline communication. If Powerline
communication becomes disabled, press the Factory Reset button to return
the Powerline adapter to its factory default settings.
other (indicated by the blinking Powerline LED). Pressing this button too soon
can temporarily disable Powerline communication. If Powerline
communication becomes disabled, press the Factory Reset button to return
the Powerline adapter to its factory default settings.