Patton electronic 6300 ユーザーズマニュアル

Starting the Discovery Process

FS6300 NMS User Manual 

4. Click on the Network Discovery tab at the top of the Discovery Administration window.

Figure 16. Network Discovery tab

5. Enter the IP Address of the network or set of devices you want the FS6300 NMS to discover. Click Add. 

Repeat this step to add more networks for the NMS to discover. 

6. Click Apply to begin the Discovery process.

7. Returning to the main window, click on Networks (under Network Database) in the menu tree to see if the 

IP subnet has already been entered into the Networks table for discovery.

The discovery process may take some time, depending on how many nodes 
there are to discover on your network. During the Discovery process, a blue 
icon with an actively spinning wheel will be in the upper right-hand corner 
of the main window.

When the NMS has collected enough information to identify the node, the node will be listed in the Nodes 
table (under Network Database). As more information is collected through the Discovery process, entries will 
appear in the FS6300 Geographical Areas section (under Network Maps).

It is very important that you do not attempt to configure any 
parameter during the Discovery process. Attempting to do so 
could corrupt the data being collected during Discovery

.

IMPORTANT