Patton electronic 6300 ユーザーズマニュアル

Re-Discovering Already Discovered Devices

FS6300 NMS User Manual 

By default, the rediscovery process discovers only devices that were not discovered previously. It does not redis-
cover the already discovered devices. To rediscover already discovered devices:

1. Click on Tools > Discovery Administration at the top of the screen. Then, click on Discover Patton 

Devices in the menu tree of the Discovery window.

2. Click on the General tab, then select the checkbox for Re-Discover Already Discovered. By default, this 

option is disabled.

Figure 22. Re-Discover Already Discovered

3. Click Apply. This change will take place the next time the NMS goes through the re-discovery process. 

(See 

You should re-discover cards after changing a card’s configuration, or if you have added a new chassis or 
devices to the network. To manually re-discover cards:

1. Right-click on the device icon. You can do this in the Geographical Area, Network Node, Chassis, or Card 

sections of Network Maps. 

2. Select Re-Discover Cards from the pull-down menu.A window displays with information about the 

card(s), including IP address, netmask, and SNMP Agent port. 

3. Click Re-Discover. A message displays at the bottom of the box: “This action will take a few minutes. 

Please watch the status message. Status: Re-discovering...”

Figure 23. Re-Discover Cards