Patton electronic 6300 ユーザーズマニュアル
Upgrading Firmware
44
FS6300 NMS User Manual
2 • Discovering Your Network
Forcing Discovery for Selected Cards
Though the cards have the updated information saved, the NMS will not display the changes until the cards
have been re-discovered. To re-discover specific cards and not the entire subnet, see
have been re-discovered. To re-discover specific cards and not the entire subnet, see
Upgrading Firmware
The FS6300 NMS supports the following Patton models:
The rack cards must have the following minimum firmware version installed in order to operate properly:
To update the firmware for a rack card:
1. Click on Tools > Firmware Upgrade at the top of the screen.
Figure 30. Tools > Firmware Upgrade
Supported Rack Cards
Supported CPE Devices
6511
3201
3196RC
3088
3096RC
3086
2616RC
1082 (C/D/I/F)
Card
Minimum Firmware Version Required
6511
6511RC-1.2.9.img
3196RC
3196RC-1.3.9.img
3096RC
3096RC-1.5.16.img
2616RC
2616RC-1.3.9.img