Panasonic PT-DW730EL ユーザーズマニュアル
[DISPLAY OPTION] menu
60 - ENGLISH
Settings
[STARTUP LOGO]
You can set the logo display when the power is turned
on.
1) Press ▲▼ to select [STARTUP LOGO].
2) Press ◀▶ to switch [STARTUP LOGO].
2) Press ◀▶ to switch [STARTUP LOGO].
z
The setting will change as follows each time
you press the button.
[DEFAULT LOGO]
[NONE]
[USER LOGO]
[DEFAULT
LOGO]
The Panasonic logo is projected.
[NONE]
No startup logo is projected.
[USER LOGO] The picture registered by the user
is projected.
Note
z
The startup logo will disappear in approximately 15
seconds.
z
Separate software “Logo Transfer Software” is
required to create and register the pictures of [USER
LOGO]. Refer to the application software download
from the website support information (http://
panasonic.net/avc/projector/software/).
[FREEZE]
The projected image is paused temporarily regardless
of the playback of the external equipment.
1) Press ▲▼ to select [FREEZE].
2) Press the <ENTER> button.
2) Press the <ENTER> button.
z
To cancel the freeze, press the <MENU>
button.
[SIDE BY SIDE]
(PT-DW730E only)
Two different input signals can be displayed
simultaneously.
1) Press ▲▼ to select [SIDE BY SIDE].
2) Press the <ENTER> button.
2) Press the <ENTER> button.
z
Two images are displayed.
Input A
Input A
Input B
3) Press the <MENU> button.
z
The
[SUB INPUT SELECT] screen is
displayed.
4) Press ▲▼ to select the image to be
displayed on the input B.
z
Press ▲▼ to select the image to be displayed
at the right side of the screen (Input B).
[VIDEO]
[S-VIDEO]
[RGB1]
[OFF]
[DVI-D]
[RGB2]
5) Press the <ENTER> button.
Note
z
To cancel the two window display, select [OFF] and
press the <ENTER> button.
z
[FREEZE] will be set against the input A side.
z
The adjustment and setting of the menu items
cannot be performed during the two window
display.
z
Values for the input A side will be applied for
the [PICTURE] settings. (Values for both input
A and input B will be applied for [CONTRAST],
[BRIGHTNESS], [COLOR], [TINT], and
[SHARPNESS].)
z
The two window display will maintain the aspect
ratio selected using the <ASPECT> button on the
remote control or the [ASPECT] setting.
z
The two window display may not be available
depending on the combination of the input signals.
Refer to “Two window display combination list (PT-
DW730E only)” (
page 101) for details.